94dc67b88a0f92da27e62d0a58cc8a8d/13249288795294324318

like_to_reg_holdout

get_the_app_against_sell_now

web-like-on-hover

weekly-picks-banner-0930-1003

lux_item_banner

free_shipping_thumb

paypal_credit

home-loggedout-phase-2

This is a breakout board used for the Burger King raspberry pi builds. 
Never been used these are kinda hard to find at this point. 
This one also comes with the lcd board. The lcd you need for that board isn’t included it’s model is 
QVGA320240 2 inch SPI serial screen 320*240 12pin ST7789V 2.0 inch LCD

Please note that this is just the button pcb and lcd pcb. This project is a moderate build and you need to source other parts for it. No i wont build it for you. No I dont have a list of the parts you need. Yes you will need to do some research on this to build it.

Burger King Gameboy Color Breakout Board

Bought these new on eBay won’t work for what I need they are new in wrapper. These are blank mini dvd-RW

Memorex Mini DVD-RW

ONE Plastic replacement screens for your Gameboy DMG.

    Protective films on the front and back of the screen
    Pre-applied adhesive for easy install

One Gray Gameboy DMG Replacement Lens

New Replacement Shell For Your Gameboy Advance

 

Replace Your Damaged Or Defective Original Shell.

Whats  included:

New Clear Replacement Gameboy Advance Shell
Some Replacement screws (will need to save some from the oem shell)
New standard Gameboy Advance buttons
New back housing sticker
Plastic Gameboy Advance screen
Replacement Silicone button pads

Clear Gameboy Advance Shell

A semi clear case to store your vintage Game Boy games.

Fits original & Gameboy Color games

This is a listing for 5 cases.

GameBoy Game Cartridge Case Lot Of 5

New Replacement Shell For Your Gameboy Advance

 

Replace Your Damaged Or Defective Original Shell.

Whats  included:

New orange Replacement Gameboy Advance Shell
Some Replacement screws (will need to save some from the oem shell)
New standard Gameboy Advance buttons
New back housing sticker
Plastic Gameboy Advance screen
Replacement Silicone button pads

Replacement Orange Gameboy Advance Shell

This is a slim backlight that fits behind the screen once you have removed the back polarizer off the Gameboy LCD. This backlight requires you to soldier 2 wires (not included) to the backlight and then to the main power capacitor on the LCD motherboard. Its Suggested that you install a Resistor between the wire going to the power side of the of the backlight and the main power capacitor. (This Resistor is included). For best results you will also need to install a bivert chip in the system.

What you get.

    White Backlight panel
    Polarizer sheet to replace one you removed
    100 ohm Resistor

White Gameboy Backlight/DMG & Pocket

Gameboy Cartridge keyring that is hand made. I had the sticker made and bought the replacement shell. This doesn’t include the game and is a empty cartridge. This is a keyring only. Please if you have questions ask.

Pokemon Gameboy Cartridge keychain

A replacement (reproduction) cartridge for you busted GameBoy game or a new housing for a homebrew Game.

    Original Gray, Yellow, Clear, and Clear Green color available.
    Compatible with DMG games
    Will fit into the DMG, GBC, GBA and GBA SP
Please let me know in a message what color you want so I know what to ship. This listing is for one cartridge shell only.

Replacement GameBoy Game Cartridge

New Replacement Shell For The GameBoy DMG  

 Replace Your Damaged Or Defective Original Shell

Whats  included:

New Replacement Gameboy Shell
Replacement screws
New standard Gameboy buttons
Plastic Gameboy screen
Replacement Silicone button pads

Gameboy DMG Replacement Shell

This is a button PCB for a Gameboy zero build. This just has the controls to a pinout. You will need other parts to finish this build. 
The PCB in the images is what you will get.

Please note that this is just the button pcb. This project is a moderate build and you need to source other parts for it. No i wont build it for you. No I dont have a list of the parts you need. Yes you will need to do some research on this to build it.

Gameboy Zero Button PCB

Played a few times been sitting around. I bought it new from GameStop.

DragonBall Z kakarot - Xbox One

I bought these from a China whole seller I didn’t like the success rate of the first 4 chips I installed so I don’t use them. I am selling them super cheap just to move them along. Please note this is a all sales final due to you have to use chips from the lot. The 4 chips I used had a 50/50 success rate.

87 Gameboy bivert chips

This is a Replacement Battery cover for the Gameboy Color. This is not a OEM part it’s a replacement.
I have all colors in the image in stock please let me know what one you want before purchase so I know what to ship you.

Gameboy Color Replacement Battery Cover

This is a button PCB for a Gameboy zero build. This just has the controls to a pinout. You will need other parts to finish this build. 
The PCB in the images is what you will get.

This is a breakout board used for the Burger King raspberry pi builds. 
Never been used these are kinda hard to find at this point. 
This one also comes with the lcd board. The lcd you need for that board isn’t included it’s model is 
QVGA320240 2 inch SPI serial screen 320*240 12pin ST7789V 2.0 inch LCD

New Replacement Shell For The GameBoy DMG  

 Replace Your Damaged Or Defective Original Shell

Whats  included:

New Replacement Clear Gameboy Shell
Replacement screws
New standard Gameboy buttons
Plastic Gameboy screen
Replacement Silicone button pads