Automotive Performance Parts & Accessories

AEM water/methanol injection system

Working system with new aluminum bung for placement of injector nozzle.

AEM water/methanol injection system

Brand new washable filter for aim cold air intake 2014-2018 GMC SIERRA 1500.

Aem dryflow air filter

Subaru WRX/STI 2002-2005 AEM short ram air intake with K&N filter and a heat shield and some fittings

In good condition! 

Air filter has been used needs to be cleaned 

The cold air intake is only a portion of the whole intake. See photos for details

2002-2005 WRX/STI AEM Short cold air intake w/ K&N filter

Increased horsepower
Tuned and dyno-tested to improve acceleration and engine sound
Low restriction aluminum tubing
Easy to install using commonly available tools
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty

21-746WR AEM COLD AIR INTAKE SYSTEM

slightly used, includes fuse tap for power
come with everything that was in the box other than the 02 sensor.

AEM AFR Gauge with wiring, 02 sensor not included

Comes with k&n filter is also carb legal  great condition

1992-2000 Honda civic aem cold air intake

Factory Box will be Cut down to reduce unnecessary waisted space and to reduce shipping costs.

The AEM 21-404C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. 

This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra GS-R models. 

Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.

The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower.

The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. 

This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. 

The tapered cylinder shaped AEM Dryflow air filter

AEM Induction 21-404C - AEM 94-01 Acura Integra GSR Silver Cold Air Intake

AEM 25-302BK adjustable Fuel Pressure Regulator; will be selling AS IS, diaphragm leaks from the sides (no punctures or tears, it just leaks), perhaps all it needs is a new diaphragm which comes in the rebuild kit for these.

If you have one of these and need parts you're in luck; if you have been looking for an adjustable regulator look no further.
This regulator is used, however it has less than 1,000 miles on it. You will received it disassembled, keep in mind, the diaphragm leaks, it wont shut out fuel, but it leaks.

I purchased this from an authorized retailer, not a knock-off.

Need more details...?
https:

AEM 25-302BK Fuel Pressure Regulator

AEM's 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.

The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.

The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.
TECHNICAL SPECS:
Weight: 12.5oz (354grams)
Outside Diameter: 39mm OD
External Materials: Black plated steel with laser etching
Inlet Fitting: 7.7mm ID, 11.0mm OD. Offset Inline

AEM 340LPH E85-COMPATIBLE HIGH FLOW IN-TANK FUEL PUMP 50-1200

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering medium uses both depth loading and structural screen wire to enhance airflow capabilities and make the filter incredibly easy to clean. The result is a true performance air filter that does not require oiling, carries a lifetime limited warranty and is capable of increasing horsepower and torque. Flange Inside Diameter: 2.75" Brand‎AEM Product Dimensions‎1.5"L x 1.5"W x 5.25"H OEM Part Number‎21-202DK Global Trade Identification Number‎00840879014834 Manufacturer‎AEM UPC‎840879014834 Model‎AEM 21-202DK Item Weight‎1.1 pounds Country of Origin‎USA Item model number‎21-202DK Is Discontinued By Manufacturer‎No Exterior‎Painted Manufacturer Part Number‎21-202DK
Additional shipping charges will be added for Shipments to Hawaii, Puerto Rico, Alaska

AEM 21-202DK AEM DryFlow Air Filter

Red dryflow filter no oil universal fit for any 6 inch diameter cold air intake or short ram intake.

AEM DRYFLOW AIR FILTER 6 inch inlet diameter

OVERVIEW

The AEM 26-2100C Intercooler Kit must be installed with AEM Cold Air Intake System part 21-687C or part 21-687P. Intakes are sold separately. This intercooler kit is a comprehensive bolt-on air cooling system. It contains all hardware necessary for installation. The large bar-and-plate intercooler core replaces the factory intercooler. The AEM intercooler core is capped on both ends with end tanks that are optimized to evenly distribute airflow across the core. Charge pipes are also included in the kit. They are constructed from high-quality mandrel-bent aluminum.

aem intake intercooler core only

AEM 35-4500-20 Water/Methanol Injection Nylon Hose B007zgf1z6. Condition is New. Never used.

AEM 35-4500-20 Water/Methanol Injection

The AEM 21-745C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. 

- This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang GT models. 

- Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. 

- The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. 

- The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. 

- This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum/breather tubes. 

- The tapered oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media.

AEM 2015 2016 2017 Mustang GT 5.0 21-745C Cold Air Intake

Overall all around increase in horsepower lower and high end
same situation less than 500 miles on the cold air intake and it does have a beautiful aluminum that keeps the air cool
Everything that’s in the pictures will be sent
So as, tighteners, filter, aluminum pipe, stickers, license plate frame, installation guide, and the throttle band 
Item was not cheap but will be listed under the original price that it goes for no lowballs 380 shipping or 360$ local no lowballs please and thank you for reading.

AEM performance Tuned Cold Air intake

AEM Dryflow Air Filters were developed in collaboration with K&N, the inventor of High Flow Air Filters. We adopted some of the best elements of cotton air filters into a new generation synthetic Dryflow Air filter. The three-dimensional filtering medium uses both depth loading and structural screen wire to enhance airflow capabilities and make the filter incredibly easy to clean. The result is a true performance air filter that does not require oiling, carries a lifetime limited warranty and is capable of increasing horsepower and torque. Flange Inside Diameter: 2.75" Brand‎AEM Product Dimensions‎1.5"L x 1.5"W x 5.25"H OEM Part Number‎21-202DK Global Trade Identification Number‎00840879014834 Manufacturer‎AEM UPC‎840879014834 Model‎AEM 21-202DK Item Weight‎1.1 pounds Country of Origin‎USA Item model number‎21-202DK Is Discontinued By Manufacturer‎No Exterior‎Painted Manufacturer Part Number‎21-202DK

Additional shipping charges will be added for Shipments to Hawaii, Puerto Rico, Alask

AEM Induction DryFlow Air Filter 21-202DK 2.75-Inch Inlet / 5.125-Inch Length

AEM Wideband AFR Digital gauge no sensor or wiring #35-8460

Bosch Oil Pressure Gauge 0-100psi

HD racing start button

All used good condition no cracks or chips in cluster housing

Aftermarket Gauge Cluster with Gauges and Start Button

Used took off motor got a new car very expensive cold air intake

Cold air intake

Works great just some bends in the air filter no big deal

Up for sale is a Like New AEM DryFlow Airfilter (air filter ONLY) which fits all of the following vehicles below:

VW Audi Sokda Seat

Check compatibility here:
https://www.aemintakes.com/28-30005-dryflow-air-filter

AEM DryFlow Air Filter 28-30005 VW Audi Skoda Seat

AEM 18-19 Hyundai Elantra L4-2.0L Cold Air Intake - 21-869C + 3 year warranty. (An email is needed so I may send you it)

2018-2019Hyundai elantra cold air intake

Brand new cold air intake. This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque.

AEM Cold Air Intake System Honda Civic Si 1.5L 2016-2020  21-830C

Works as should. No issues. Upgraded to X series. 
52 mm. 

Comes with harness and oil pressure sensor. View photos for conditions. 

AEM Hondata K series K20 k24 DC5 RSX Type S Acura Honda EP3 Civic TSX SI

AEM Oil Pressure Gauge kit 35-8460

aem air filter

Women

Other

Antique

Travel & Luggage

Electronics

Dresses

Arts & Crafts

Tops & blouses

Needlecraft

Pincushion

Sweaters

Music

Books

Pet Supplies

Daily & travel items

Automotive

Office Supplies

Musical instruments

Vinyl

Pants

Car care

Car electronics & accessories

Exterior accessories

Maxi

Interior accessories

Motorcycle & powersports

Automotive Oils & Fluids

Paint, body & trim

Performance parts & accessories

Replacement parts

RV parts & accessories

Tools & equipment

Automotive enthusiast merchandise

Blouse

Button down shirt

Home Audio

T-shirts

Toys & Collectibles

Dolls & Accessories

Fashion Dolls

Cardigan

Crewneck

Coats & jackets

Remote Control Toys & Vehicles

Trains & Train Sets

Stuffed Animals & Plush

Stuffed Animals

Craft Kits

Paint

Vintage & Antique Toys

Cars

Athletic apparel

Athletic Leggings

Swimwear

Leather

Women's handbags

Vacuums

Home Speakers

Jean jacket

Automotive Lighting Accessories

Automotive Lights

Automotive Tire & Wheel Accessories

Automotive Tires

Automotive Wheels & Rims

Jackets

Other Dining Furniture

Two-piece

Shoes

Shoulder Bags

Other Automotive Fluids

Garden & Outdoor

Tops

Boots

Flats

Office

Heels

Slippers

Button-front

Kids

Tools

Flight/bomber

Athletic

Home

Sandals

Vintage & collectibles

Beauty

Kitchen Furniture

Home decor accents

Home decor

Home appliances

Trash & recycling

Storage & organization

Fishing Gear

Games

Sports & outdoors

Cameras & photography

Cell phones & accessories

TV & Video

Video games & consoles

Media

Brooch

Handmade

Like new

Good

Fair

Black

Grey

Blue

Deals

Status

For sale

Sold

Price

Under $25

$25 to $50

$50 to $100

$100 to $200

$200 and up

Cables & adapters

Condition

Brand

Custom Accessories

Toyota

Mugen

Subaru

Honda

Nissan

K&N Engineering

Ford

Mercedes Benz

Tesla

Lexus

Mitsubishi

Volkswagen

Chevrolet

Audi

Bosch

Dodge

Mustang

Hypertech

ACDelco

Edelbrock

FRAM

Mopar

Dorman

Holley

Supreme

Customized & Personalized

Superchips

Harley-Davidson

Jeep

ACCEL

Denso

AEM Automotive Performance Parts & Accessories

View more