Name: Archon Studio Dungeons & Lasers Deuslair The King of Gates
Brand: Dungeon & Dragons
Price: 5.5 USD
Availability: InStock

Handmade Miniatures

Set of 3 Earthen Elementals from Cross Lances Studio
This listing is for all 3 minis

Physical printed resin miniatures with bases
Bases: Earth 1 & 2 - 25mm, Earth Lord - 32mm
Figures foot to eye: #1 - 19mm, #2 - 17mm, Earth Lord - 45mm
Total heights apx.: #1 - 27mm, #2 - 32mm, Earth Lord - 62mm
These particular models consist of 2 separate pieces each (body, base) and will need assembly

Printed in Syratech Grey
They will ship Unassembled & Unpainted - super glue or a like adhesive will be needed to put them together
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am licensed to sell physical prints of models designed by Cross Lance

Earthen Elementals (3) from Cross Lances Sudio. Total heights apx. 27mm - 62mm

Quorenderi, Lord of the Depths (standing) from DM Stash's Darkest Depths set

75mm Scale Physical printed resin miniature with base
Base apx 119mm across on the round
Body apx. 121mm from foot to eye
Total height apx. 177mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis printed on demand, please allow a little time to make and clean them

I have been officially licensed to sell physical prints of models designed by DM Stash

Depths Lord from DM Stash's Darkest Depths set.Full height apx. 177mm

Flame Lord from Cross Lances Studio
Renders show all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 32mm across, 
Body apx. 51mm from base of model to eye 
Total height apx. 63mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or other cleanup prior to painting may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Flame Lord from Cross Lances Studio. Total height apx. 63mm

Quorenderi, Lord of the Depths (seated) from DM Stash's Darkest Depths set

32mm Scale Physical printed resin miniature with base
Base apx 50mm across on the round/57 counting terrain
Body apx. 37mm from foot to eye
Total height apx. 86mm
This particular model consists of 3 separate pieces (base, body, throne) and will need assembly
Note: Throne looks like a tight fit to the base

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't print in color
99% of the time your figure will be grey, unless I have to use a different resin

Minis printed on demand, please allow a little time to make and clean them

I have been officially licensed to sell physical prints of models designed by DM Stash

Depths Lord (Throne) from DM Stash's Darkest Depths set. Total height apx. 86mm

Sorngaar the Cindering, Lord of Fire Peak mountain from DM Stash's Grand Hunt set.

32mm Scale Physical printed resin miniature with base.
Base apx 50mm across; body apx. 69mm from his base to the tip of his sword.
Total height apx. 75mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color.
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by DM Stash.

Sorngaar the Cindering from DM Stash's Grand Hunt.  Total height apx 75mm

Set of 3 Flame Elementals from Cross Lances Studio
This listing is for all 3 minis

Physical printed resin miniatures with bases
Bases: Flame 1 & 2 - 25mm, Flame Lord - 32mm
Figures foot to eye: #1 - 27mm, #2 - 25mm, Flame Lord - 51mm
Total heights apx.: #1 - 38mm, #2 - 43mm, Flame Lord - 63mm
These particular models consist of 2 separate pieces each (body, base) and will need assembly

Printed in Syratech Grey
They will ship Unassembled & Unpainted - super glue or a like adhesive will be needed to put them together
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am licensed to sell physical prints of models designed by Cross Lance

Flame Elementals (3) from Cross Lances Sudio. Total heights apx. 38mm - 63mm

Archon Studio Dungeons & Lasers Deuslair The King of Gates from the White Eye Dunes boxset. Could be used as a mummy lord or undead lich. Comes from a smoke free and pet free household.

Archon Studio Dungeons & Lasers Deuslair The King of Gates

Lord of the Oni from Claudio Cassini Studio
Render shows 3 sides, this listing is for One mini

Physical printed resin miniature with base
Base apx 60mm x 40mm 
Total height apx. 90mm
This particular model consists of 6 separate pieces (base, legs, torso, head, tail, upper arms) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print it out in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of the Oni & his squad models by Claudio Cassini
M. Lic. #27-1123255542-9105168-US

Lord of the Oni from Claudio Cassini Studio. Total height apx. 90mm

Kavaramon, arch-devil from DM Stash's Heaven & Hell set

32mm Scale Physical printed resin miniature with base
Base apx 75mm across
Body apx. 79mm from foot to lower eye
Total height apx. 113mm
This particular model consists of 4 separate pieces (base, body, 2x wings) and will need assembly
Model is Solid

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by DM Stash

Kavaramon, arch-devil from DM Stash's Heaven & Hell set. Total height apx. 113mm

Earthen Elemental Lord from Cross Lances Studio
Renders show all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 32mm across, 
Body apx. 45mm from base of model to eye 
Total height apx. 62mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or other cleanup prior to painting may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Earthen Elemental Lord from Cross Lances Studio. Total height apx. 62mm

Ral Partha RARE vintage Pewter or lead Miniature 
From 1977
Wind Lord
01-041 (v2)

Please see my other listings and message me to save on combined shipping on bundles.



Ral Partha 1977 Miniature Wind Lord

Dwarven High Lord from Bite the Bullet's Dwarves set

Physical printed resin miniature with base
Base apx 26mm across
Body apx. 28mm foot to eye
Total height apx. 45mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

Dungeon & Dragons Handmade Lord Byron's Harmony Garden Miniatures

Dungeon & Dragons Handmade Lord Byron's Harmony Garden Miniatures

Save this search

Get the app.

SHOP

SELL

SUPPORT

COMPANY & POLICIES