Name: Painted Cauldron Mimic miniature from Archon Studio Dungeons and Lasers 2 KS
Brand: Dungeon & Dragons
Price: 19.5 USD
Availability: InStock

Handmade Miniatures

Tiny goblin and sand castle from Cross Lances Studio's Pool Party 3 set
Render shows 3 sides, this listing is for One mini

Physical printed resin miniature with plain base
Base apx 32mm across
Body apx. 14mm from foot to eye
Total height apx. 25mm
This particular model consists of 2 separate pieces (body, base) and will need assembly
Note: Base of bucket may need sanded down

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by Cross Lances.

Sand Castle Goblin from Cross Lances Studio. Total height apx. 25mm

Rabbit with Soaker from Cross Lances' Pool Party 2! collection.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 28mm from foot to top of ears. 
Total height apx. 31mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Rabbit with Soaker from Cross Lances' Pool Party 2 set.  Total height apx. 31mm

Pig with float ring from Cross Lance's Pool Party 2! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 28mm from foot to top of head. 
Total height apx. 35mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Pig with Float Ring from Cross Lances' Pool Party 2 set.  Total height apx. 35mm

Painted Cauldron Mimic miniature from Archon Studio Dungeons and Lasers 2 KS. Could be used as a hidden surprise encounter for your party when they enter a wizards/witches lair. Comes on a 25mm base and varnished with Vallejo Gloss Varnish.

Painted Cauldron Mimic miniature from Archon Studio Dungeons and Lasers 2 KS

Lady with parasol from Cross Lance's Pool Party 1! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 35mm from left foot to top of head. 
Total height apx. 49mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Lady with Parasol from Cross Lances' Pool Party 1 set.  Total height apx. 49mm

Ice cream cart Viking from Cross Lances Studio's Pool Party 3 set
Render shows 3 sides, this listing is for One mini

Physical printed resin miniature with plain base.
Base apx 50mm across
Body apx. 31mm from foot to eye
Total height apx. 41mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by Cross Lances.

Ice Cream Viking from Cross Lances Studio. Total height apx. 41mm

Hello and Welcome to my Store:

Here We Have a
1982 Ral Parth War Horse Dungeons and Dragons D&D Metal Miniature
Comes from a Pet Free and Smoke Free Home

I also Have a YouTube Channel based around my eBay & Mercari Sales(this is not my only account).  All Shipping and Packing is recorded to ensure Client Satisfaction.

Please Check put my other listings and don't hesitate to ask questions, I am a firm believer in open Communication and transparency

1982 Ral Parth War Horse Dungeons and Dragons D&D Metal Miniature

Ral Partha RARE vintage Pewter or lead Miniature 
From 1977
Imp War Party
01-039 a and b

Please see my other listings and message me to save on combined shipping on bundles.



Ral Partha 1977 Mini Imp War Party

Duck with snorkel from Cross Lance's Pool Party 2! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 25mm from foot to top of head. 
Total height apx. 35mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Duck with Snorkel from Cross Lances' Pool Party 2 set.  Total height apx. 35mm

Full set of all 5 animals from Cross Lance's Pool Party 2! set.
Renders of individual animals show 3 sides, there are 5 minis in total.

Physical printed resin miniatures with plain bases.
Bases apx 25mm across.
Total heights: Rabbit-31mm, Pig-35mm, Duck-35mm, Cat-28mm, Bear-48mm
These models consist of 2 separate pieces each (body, base) and will need assembly.

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put them together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances

Set of 5 Pool Party 2 animals from Cross Lances Studio. Average height 35mm

Bear with parasol and towel from Cross Lance's Pool Party 2! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 37mm from foot to top of head. 
Total height apx. 48mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Bear with Parasol from Cross Lances' Pool Party 2 set.  Total height apx. 48mm

Dwarf relaxing on a pool ring from Cross Lance's Pool Party 1! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 23mm from bottom of float to top of hair.
Total height apx. 26mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Dwarf on pool ring from Cross Lances' Pool Party 1 set.  Total height apx. 26mm

Orc with soaker from Cross Lance's Pool Party 1! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 33mm from foot to top of head. 
Total height apx. 49mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Orc with Soaker from Cross Lances' Pool Party 1 set.  Total height apx. 49mm

Pool Party set 3 from Cross Lances Studio
This listing is for all Three minis

Physical printed resin miniatures with bases
2x Bases apx 50mm across, 1x 32mm
Figures foot to eye: Dragon - 37mm, Goblin - 14mm, Viking - 31mm
Total heights apx.: Dragon - 47mm, Goblin - 25mm, Viking - 41mm
These particular models consists of 6 separate pieces (3x body, 3x base) and will need assembly

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted - super glue or a like adhesive will be needed to put them together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be navy grey, unless I run out and have to use a different resin

Minis are printed on demand, please allow a little time to make and clean them

I am licensed to sell physical prints of models designed by Cross Lances

Pool Party Set 3 from Cross Lances Sudio. Total heights apx. 25mm - 47mm

Cat with sunglasses and shorts from Cross Lance's Pool Party 2! set.
Render shows all 3 sides, this listing is for One mini.

Physical printed resin miniature with base.
Base apx 25mm across; body apx. 25mm from foot to top of head. 
Total height apx. 28mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lances.

Cat with Sunglasses from Cross Lances' Pool Party 2 set.  Total height apx. 28mm

Dragon relaxing on a deck chair from Cross Lances Studio's Pool Party 3 set
Render shows 3 sides, this listing is for One mini

Physical printed resin miniature with plain base.
Base apx 50mm across
Body apx. 37mm from claw tips to eye
Total height apx. 47mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by Cross Lances.

Deck chair Dragon from Cross Lances Studio. Total height apx. 47mm

Full set of all 3 humanoids from Cross Lance's Pool Party 1! set.
Renders of individuals show 3 sides, there are 3 minis in total.

Physical printed resin miniatures with plain bases.
Bases apx 25mm across.
Total heights: Dwarf-26mm, Orc-49mm, Lady-49mm
These models consist of 2 separate pieces each (body, base) and will need assembly.

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put them together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Cross Lance

Dungeon & Dragons Handmade Party Miniatures

Dungeon & Dragons Handmade Party Miniatures

Save this search

Get the app.

SHOP

SELL

SUPPORT

COMPANY & POLICIES