Name: Plasmoid Boys Dragon Trappers Lodge Warlock
Brand: Dungeon & Dragons
Price: 5.39 USD
Availability: InStock

Handmade Miniatures

Price increase due to Phoenix mount alone.
Once a cult of humans, the Gryphkins are the legendary people of the sky, often living in sacred or unholy place far away from the rest of the world. Their appearance and skill depends on where their eggs had been laid.
The noble High-Gryphkin of the Cult of the Eye protects the Eye of Tialevor from the lust of sorcerers and Kings on the peak of the Wyvern Mountains.
The eggs laid in the realms of mortals generate wingless Gryphkin, smaller, but skilled in the art of shadow manipulation, espionage and murder.
In the Cult of the Eye both forms are essential to keep the Eye safe and at the same time protect the world from its endless corruption, but It would seem that the evil influence of the Eye has slowly turned his jailers into his... thralls.

Set 32mm Eye-Cult Gryphkin Artisan Guild

Kadna Moonborn - High Priestess BUST from DM Stash's Drow of the Deep set.

Apx. 80mm from bottom of belt to top of head.
Total height apx. 120mm
This particular model is a single piece.

___
Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by DM Stash.

Kadna Moonborn BUST from DM Stash's Drow of the Deep set.  Total apx 120mm

Jack Frost from Irnkman Minis

Physical printed resin miniature with base
Base apx. 25mm across
Body apx. 23mm from foot to eye
Total height apx. 30mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Irnkman Minis

Jack Frost from Irnkman Minis. Total height apx. 30mm

12 piece Jungle scenery pack from Bite the Bullet's Amazons set

Physical printed resin miniatures, no bases
Watchtower, Low tent, High tent, Open tent
2x Palm trees, 3x shrubs
Runestone altar
1x single fence, 1x double fence

Total heights apx.
Watchtower: 131mm T x 80mm W
High tent: 80mm T x 93mm L
Low tent: 38mm T x 51mm L
Open tent: 42mm T x 45mm L
Runestones: 44mm T x 78mm W x 97mm L
Palm trees: 75mm & 88mm T
Shrubs: 19mm T
Fence: 58mm L

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted
Figures will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am licensed to sell physical prints of models designed by Bite the Bullet

Jungle scenery pack from Bite the Bullet. 12 pc. set

High tent - scatter terrain from Bite the Bullet's Amazons set

Physical printed resin miniature, no base
Total height apx. 80mm
Apx. 48mm wide (Counting the tusks) x 93mm long
This particular model consists of 2 separate pieces (platform, tent) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figure will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

High Tent - scatter terrain from Bite the Bullet. Total height apx. 80mm

Deep water murloc from Bite the Bullet's Fishing Village set

Physical printed resin miniature with base
Base apx 25mm across
Body apx. 20mm from Right foot to eye
Total height apx. 31mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey for crisp, clean details
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

Deep water murloc from Bite the Bullet's Fishing Village. Total height apx. 31mm

Aulten Dros, High Marshall from DM Stash's Masters of the Arcane set

32mm Scale Physical printed resin miniature with base
Base apx 25mm across on the round
Body apx. 35mm from Right foot to eye
Total height apx. 52mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis printed on demand, please allow a little time to make and clean them

I have been officially licensed to sell physical prints of models designed by DM Stash

Aulten Dros, High Marshall from DM Stash's Arcane set. Total height apx. 52mm

Centaur barbarians, set of 3 from Cross Lances Studio.
This listing is for all Three minis

Physical printed resin miniatures with bases
Bases apx 32mm across
Figures foot to eye: Spearman-31mm, Low axe-30mm, High axe-36mm
Total heights apx.: Spearman-42mm, Low axe-39mm, High axe-48mm
These particular models consists of 6 separate pieces (3x body, 3x base) and will need assembly

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted - super glue or a like adhesive will be needed to put them together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be navy grey, unless I run out and have to use a different resin

Minis are printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Cross Lances

Centaur Barbarians-set of 3 from Cross Lances Studio.Total heights apx 39mm-48mm

Dwarven High Lord from Bite the Bullet's Dwarves set

Physical printed resin miniature with base
Base apx 26mm across
Body apx. 28mm foot to eye
Total height apx. 45mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

Dwarven High Lord from Bite the Bullet's Dwarves set. Total height apx. 45mm

Queen Schala from Irnkman Minis

Physical printed resin miniature with base
Base apx. 25mm across
Body apx. 32mm from foot to eye
Total height apx. 44mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Irnkman Minis

Queen Schala from Irnkman Minis. Total height apx. 44mm

Dwarven High Priest from Bite the Bullet's Dwarves set

Physical printed resin miniature with base
Base apx 26mm across
Body apx. 28mm foot to eye
Total height apx. 48mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

Dwarven High Priest from Bite the Bullet's Dwarves set. Total height apx. 48mm

Kadna Glydrin (Moonborn) - High Priestess from DM Stash's Drow of the Deep set.

75mm Scale Physical printed resin miniature with scenic base.
Base apx 51mm across on the round. 
Body apx. 79mm from foot to eye. 
Total height apx. 103mm
This particular model consists of 2 separate pieces (body, base) and will need assembly

Printed in Syratech Navy Grey for crisp, clean details
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding, gap filling or cleanup may be required prior to painting

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by DM Stash.

Kadna Moonborn - Priestess from DM Stash's Drow of the Deep set. Total apx 103mm

Centaur barbarian #3 (high axe) from Cross Lances Studio.
Render shows 3 sides, this listing is for One mini

Physical printed resin miniature with plain base.
Base apx 32mm across
Body apx. 36mm from back hooves to eye
Total height apx. 48mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by Cross Lances.

Centaur Barbarian #3 from Cross Lances Studio. Total height apx. 48mm

Aulten Dros, High Marshall from DM Stash's Masters of the Arcane collection.

75mm Scale Physical printed resin miniature with base
Base apx 60mm across on the round
Body apx. 82mm from Right foot to eye
Total height apx. 122mm
This particular model consists of 3 separate pieces (base, body, right hand glaive) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis printed on demand, please allow a little time to make and clean them

I have been officially licensed to sell physical prints of models designed by DM Stash

Aulten Dros, High Marshall from DM Stash's Arcane set. Total height apx. 122mm

Plasmoid Boys Dragon Trappers Lodge Warlock
32mm Scale
Miniature made of high-quality resin, maximum detail level.
Ready to assemble and paint.
100% Brand New
3d Printed Raw
 additional sanding, priming, or line filling may be needed.
officially licensed to sell these designs commercially by the Dragon Trappers Lodge
Physical Product
Product for ages 14 and older

NOTES
- All orders are MADE TO ORDER. Orders will be printed in the order they are accepted.
- The model will come with an individual base.
- Assembly is super easy by using an adhesive like super glue.
- Pictures are stock 3D renderings. All 3D prints are in gray resin, excellent for painting.

ASSEMBLY
Some assembly of this model will be required and some gluing. Minor sanding and filling. All efforts will be taken to deliver the cleanest and easiest to assemble model possible. Resin models are not perfect and there should be some level of anticipation that little gaps, support marks, or other imperfect

Dungeon & Dragons Handmade High Sheen Miniatures

Dungeon & Dragons Handmade High Sheen Miniatures

Save this search

Get the app.

SHOP

SELL

SUPPORT

COMPANY & POLICIES